beautypg.com

Xylem Lab 960 User Manual

Page 41

background image

Lab 960

Operation

41

ba75557e05

11/2009

Note
If there are not enough memory locations available for your
measurements:

z Output and backup the data storage (see page 42) and

z clear the memory (see page 43).

Switching off the

automatic storing

function

You can terminate the automatic storing function in the following ways:

z set the storage interval (Int.1) to OFF, or

z switch the meter off and then on again.

4

Confirm with .
Ident and the ID number that was last set is displayed.

5

Set the required ID number with <

▲><▼>.

6

Confirm with .
The meter switches to the measured value display and starts
the measuring and storing procedure.
AutoStore flashes on the display.

7

As soon as all of the 800 memory locations are occupied,
AutoStore is terminated (Int.1 = OFF).

See also other documents in the category Xylem Tools: