Xylem Lab 850, up to serial number 09470314 - Manual (Page 45)

Lab 850 What to do if...
45 ba75553e03 01/2006
Obviously incorrect
measured values
Instrument does not
react to keystroke
You want to know which
software
version is in the
instrument
Cause Remedy
pH electrode:
– pH electrode unsuitable – Use a suitable electrode
– Temperature difference
between buffer and test sample
too high
– Adjust temperature of buffer
or sample solutions
– Measurement procedure not
suitable
– Follow special procedure
Cause Remedy
– Operating condition undefined
or EMC load unallowed
– Processor reset:
Press and hold the
key and switch the meter on
Cause Remedy
– E. g., a question by the service
department
– Switch on the meter.
During the display test,
display the software version
with .