Xylem IM205 Vortex Series - Manual (Page 8)

6 Vortex Installation, Operation and Maintenance Manual
• Always bear in mind the risk of:
• electrical accidents
• burn injuries
Clean chemicals from the eyes
1. Forcibly hold the eyelids apart with the fingers.
2. Rinse the eyes for at least 15 minutes. Use an eyewash or running water.
3. Seek medical attention.
Clean chemicals from the body
1. Remove contaminated clothing.
2. Wash the skin with soap and water for at least 1 minute.
3. If required, seek medical attention.
Product approval standards
Regular standards
All electrical ratings and performance of the motors comply with UL, CSA and NEMA
standards.
Product warranty
Personnel requirements
All work on the product must be carried out by certified electricians and ITT authorized
mechanics.
ITT disclaims all responsibility for work done by untrained and unauthorized personnel.
Modification and spare parts
Modifications or changes to the product/installation should only be carried out after con-
sulting with ITT. Original spare parts and accessories authorized by ITT are essential for
compliance. The use of other parts can invalidate any claims for warranty or compensation
and explosion-proof approvals.
Warranty claim
For warranty claim, contact your ITT Fluid Technology representative.
Introduction and Safety (continued)