Xylem IM228 R03 Model e-SV (esv) User Manual

Page 10

Lift and handle the product carefully,

using suitable lifting equipment. Observe all

the accident prevention regulations.

When you receive the pump, check the outside of

the package for evident signs of damage. If the

product bears visible signs of damage, notify our

distributor within 8 days from the delivery date.

2. STORING THE PACKED PRODUCT

Ambient temperature 32º F to 104º F.
Short Term: (Less than 6 months) Goulds Water

Technology normal packaging procedure is designed

to protect the pump during shipping. Upon receipt,

store in a covered and dry location.
Long Term: (More than 6 months) Rotate shaft

several times every 3 months. Refer to driver and

coupling manufacturers for their long term storage

procedures. Store in a covered dry location.

3. UNPACKING THE PRODUCT

Use suitable equipment. Observe all the

accident prevention regulations in force. Lift

and handle the product carefully, using

suitable lifting equipment.
When you receive the pump, check the outside of the

package for evident signs of damage. If the product

bears visible signs of damage, notify our distributor

within 8 days from the delivery date.

4. HANDLING THE PRODUCT

Lift and handle the product carefully, using

suitable lifting equipment. Observe the

accident prevention regulations in force.

The product must be securely harnessed for lifting

and handling. Some electric pumps have eyebolts

that can be used for this purpose.

The installation operations must be carried out by

qualified and experienced personnel. Use suitable

equipment and protections. Observe the accident

prevention regulations in force.
Always refer to the local and/or national regulations,

legislation and codes in force relating to the selec-

tion of the installation site and the water and power

connections.

1. SITE SELECTION

Make sure that no obstructions or obstacles hinder

the normal flow of the cooling air delivered by the

motor fan. Make sure there is adequate clearance

around the pump for the maintenance operations.

Whenever possible, raise the pump slightly from the

level of the floor. See the figures below and at the top

of the next column for possible installation configu-

rations. Horizontal operation requires special mount-

ing with a horizontally configured pump.

2. ANCHORING

The pump must be anchored securely with bolts to

a concrete foundation or equivalent metal structure

(shelf or platform). If the pump is large-sized and

needs to be installed near rooms inhabited by people,

suitable vibration-damping supports should be pro-

vided to prevent the transmission of the vibrations

from the pump to the reinforced concrete structure.

The dimensions of the pump base and anchoring

holes are shown.

1SV-5SV

10SV-22SV 33SV 46SV-92SV 125SV

(mm)

3.94 (100) 5.12 (130) 6.69 (170) 7.48 (190) 10.83 (275)

7.09 (180) 8.46 (215) 9.45 (240) 10.43 (265) 14.96 (380)

5.91 (150) 7.28 (185) 8.66 (220) 9.45 (240) 12.99 (330)

8.27 (210) 9.65 (245) 11.42 (290) 12.4 (315) 17.72 (450)

Ø A

0.51 (13)

0.59 (15)

0.75 (19)

0.16(4)

ø A x N