beautypg.com

Troubleshooting, Probe fails to operate – Bell & Gossett 211013D PSE 800 M Low Water Cut-off User Manual

Page 16

background image

Troubleshooting

Probe fails to operate

Perform the following diagnostic checks if the probe fails to operate as required:
1. Check that the water level in the boiler is at or above the level of the probe.
2. Recheck all wiring to ensure proper connections as specified in the wiring diagrams of

the boiler manufacturer or in this instruction manual.

3. Check to ensure that PTFE tape has not been used on the threaded connection of the

electrode to the boiler.

4. Some foaming is common in certain boilers. Refer to recommendations from the

boiler manufacturer for cleaning the boiler and piping when excessive foaming
occurs.

Troubleshooting

14

PSE-800-M Low Water Cut-off Installation, Operation, and Maintenance Manual