Acer AR180 F1 - Manual (Page 130)

Appendix A: Server management tools 112
9 Select YES to Save Configuration and press any key to return to the
Configuration menu.
10 Press ESC to return to the Management Menu
Initialing a RAID Volume
1 Select Initialize from Management menu. All logical drives should
be listed under Logical Drives.
2 Press Spacebar to select drives for initialization. The selected drive
will be shown in yellow.
3 After selecting the drives, press F10 and select YES to start the
initialization process.
4 When initialization is complete, press ESC to continue.
5 Press ESC to return to the Management Menu.
Assigning a Hot Spare Drive
1 Select Objects from Management menu.
2 Select Physical Drive from Objects. All of the HDDs will be listed.
3 Select a drive marked as READY and press Enter.
4 Select Make Hot Spare and press Enter.
5 Select Yes then you will see the HDD is changed from READY to
HOTSP.
6 Press ESC to return to the Management Menu.