Acer AR180 F1 User Manual
Page 122
5 System troubleshooting
104
2
Verify that the add-in video controller card is fully seated in its
slot.
3
Reboot the system for the changes to take effect.
4
If there are still no characters on the screen after you reboot the
system, reboot it again.
Take note of the beep codes emitted during POST. This
information may be required if you seek technical assistance.
If POST does not emit any beep code and characters still does not
appear, the display monitor or the video controller may be
defective. Contact your local representative or authorized dealer
for technical assistance.