Changing to windows 7 – Acer TravelMate P245-MG User Manual
Page 54
35
English
Windows will restart, replace Windows 7 with Windows 8, and then start the
Windows 8 setup process.
Note: After configuring Windows 8, enter the BIOS (press
starting your computer) enter the Boot menu and change the Boot
Mode to UEFI.
Please refer to "Changing BIOS settings" on page 36.
Changing to Windows 7
Note: To change back to Windows 7, you must change Boot Mode
back to Legacy BIOS. Windows 7 will not start if the BIOS Mode is
set to UEFI. Please refer to "Changing BIOS settings" on page 36.
Start Windows 8; from Start, type ‘recovery’ to open Acer Recovery Management.
1
Select Restore Factory Settings.
2
Select Yes.
This manual is related to the following products: