Diodes PAM2310 User Manual
Pam2310, Description, Features

PAM2310
Document number: DSxxxxx Rev. 1 - 0
1 of 11
www.diodes.com
September 2012
© Diodes Incorporated
PAM2310
A Product Line of
Diodes Incorporated
2A LOW NOISE STEP-DOWN DC-DC CONVERTER
Description
The PAM2310 is a 2A step-down DC-DC converter. At heavy load,
the constant-frequency PWM control performs excellent stability and
transient response. No external compensation components are
required
The PAM2310 supports a range of input voltages from 2.7V to 5.5V,
allowing the use of a single Li+/Li -polymer cell, multiple Alkaline/
NiMH cell,and other standard power sources. The output voltage is
adjustable from 0.6V to the input voltage. The PAM2310 employs
internal power switch and synchronous rectifier to minimize external
part count and realize high efficiency. During shutdown, the input is
disconnected from the output and the shutdown current is less than
1µA. Other key features include over-temperature and short circuit
protection, and under-voltage lockout to prevent deep battery
discharge.
The PAM2310 delivers 2A maximum output current while consuming
only 42µA of no-load quiescent current. Ultra-low R
DS(ON)
integrated
MOSFETs and 100% duty cycle operation make the PAM2310 an
ideal choice for high output voltage, high current applications which
require a low dropout threshold.
The PAM2310 is available in SOP-8 package.
Features
•
Output Current: Up to 2A
•
Output Voltage: 0.6V to VIN
•
Input Voltage: 2.7V to 5.5V
•
Peak Efficiency up to 95%
•
42µA (typ) No Load Quiescent Current
•
Shutdown Current: <1µA
•
100% Duty Cycle Operation
•
1.5MHz Switching Frequency
•
Internal Soft Start
•
No external Compensation Required
•
Current Limit Protection
• Thermal
Shutdown
• SOP-8
Package
Pin Assignments
Applications
•
5V or 3.3V Point of Load Conversion
• Telecom/Networking
Equipment
•
Set Top Boxes
• Storage
Equipment
• Video
Cards
•
DDR Power Supply
Typical Applications Circuit
⎟
⎠
⎞
⎜
⎝
⎛ +
=
2
R
1
R
1
x
6
.
0
V
O