beautypg.com

Diodes 74AHCT138 User Manual

Description, Features, Pin assignments

background image

74AHCT138

Document number: DS35483 Rev. 2 - 2

1 of 9

www.diodes.com

June 2013

© Diodes Incorporated

74AHCT138

3 TO 8 LINE DECODER DEMULTIPLEXER

Description

The 74AHCT138 is an advanced high speed CMOS device that is
designed to be pin compatable with 74LS low power Schottky types.

The device accepts a three bit binary weighted address on input pins
A0, A1 and A2 and when enabled will produce one active low output
with the remaining seven being high.

There are two active LOW enable inputs E1 and E2, and one active
HIGH enable input E3. The disabled device state results in all outputs
being high. The enable state occurs with E1 and E2 asserted low and
E3 asserted high.

The multiple enable lines allow for the parallel expansion of decoders
to create 4-to-16 line versions with no additional parts and 5-to-32
versions with the addition of a single inverter.

Features

Supply Voltage Range from 4.5V to 5.5V

Sinks or Sources 8mA at V

CC

= 4.5V

CMOS Low Power Consumption

Schmitt Trigger Action at All Inputs

Inputs Accept up to 6.0V

ESD Protection Tested per JESD 22

Exceeds 200-V Machine Model (A115-A)

Exceeds 2000-V Human Body Model (A114-A)

Exceeds 1000-V Charged Device Model (C101C)

Latch-Up Exceeds 250mA per JESD 78, Class II

Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

Halogen and Antimony Free. “Green” Device (Note 3)

Pin Assignments

Applications

Memory chip select decoding

 Demultiplexing

Single line peripheral control

Allow simple serial bit streams from a microcontroller to control as
many peripheral lines as needed



Notes:

1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.

2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and

<1000ppm antimony compounds.

Click here for ordering information, located at the end of datasheet