beautypg.com

1 using the detergent, 2 setting and starting a programme setting mode, Starting a programme without delay start – AEG F45020VI1P User Manual

Page 27: Starting a programme with delay start, Opening the door while the appliance operates, Cancelling the programme

background image

• If you use the combi detergent

tablets, activate the Multitab op-
tion.

5. Set and start the correct programme

for the type of load and the degree
of soil.

7.1 Using the detergent

20

30

M AX

1

2

3

4

+

-

A

B

C

1.

Press the release button (B) to open
the lid (C).

2.

Put the detergent in the compart-
ment (A) .

3.

If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.

4.

If you use detergent tablets, put the
tablet in the compartment (A).

5.

Close the lid. Make sure that the re-
lease button locks into position.

7.2 Setting and starting a
programme

Setting mode

For some settings it is necessary that the
appliance is in setting mode.
The appliance is in setting mode when,
after the activation, all the programme
indicators come on.
If the control panel does not show this
condition, press and hold, at the same

time, button

and button

un-

til the appliance is in setting mode.

Starting a programme without
delay start

1. Open the water tap.
2. Press the on/off button to activate

the appliance. Make sure that the ap-
pliance is in setting mode.

3. Press the button of the programme

you want to set. The related pro-
gramme indicator stays on while all
the other programme indicators go
off.

4. Close the appliance door, the pro-

gramme starts.

Starting a programme with
delay start

1. Set the programme.

2. Press the Delay again and again until

the indicator of the number of hours
you want to set comes on. You can
set 3, 6 or 9 hours.
• The delay start indicator comes on.

3. Close the appliance door, the count-

down starts.
• When the countdown is comple-

ted, the programme starts.

Opening the door while the
appliance operates

If you open the door, the appliance
stops. When you close the door, the ap-
pliance continues from the point of inter-
ruption.

Cancelling the delay start
while the countdown operates

When you cancel the delay start, also the
programme is cancelled.
1. Press and hold, at the same time,

button

and button

until

all the programme indicators come
on.

2. Set the programme again.

Cancelling the programme

1. Press and hold, at the same time,

button

and button

until

ENGLISH

27