AEG F45020VI1P - Manual (Page 24)

the indicators of buttons ,
and start to flash.
3.
Press button .
•
The indicators of buttons
and
go off.
•
The indicator of button con-
tinues to flash.
• The end indicator comes on.
4.
Press button . The end indicator
goes off, the acoustic signals are de-
activated.
5. Deactivate the appliance to confirm
the setting.
How to activate the acoustic signals
1. Refer to ‘How to deactivate the
acoustic signals’, step (1) through (3).
2.
Press button ,
•
The indicators of buttons
and
go off.
•
The indicator of button con-
tinues to flash.
• The end indicator is off.
3.
Press button . The end indicator
comes on, the acoustic signals are
active.
4. Deactivate the appliance to confirm
the setting.
6. BEFORE FIRST USE
1. Make sure that the set level of the
water softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent
and do not load the baskets.
6.1 Adjusting the water softener
Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Manual Elec-
tronic
47 - 50 84 - 90 8.4. - 9.0 58 - 63
2
1) 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57
2
1) 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52
2
1) 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45
2
1) 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35
2
1) 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
2
1)
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4
24 www.aeg.com