Diodes AP2014/A User Manual
Ap2014/a, Applications, Ordering information
![background image](/manuals/306171/1/background.png)
AP2014/A
SYNCHRONOUS PWM CONTROLLER
AP2014/A Rev. 5 1 of 14 FEBRUARY 2009
©
Diodes Incorporated
Lead-free
Lead-free
•
Synchronous Controller in 8-Pin Package
•
Operating with single 5V or 12V supply voltage
•
Internal 200KHz Oscillator (400KHz for AP2014A)
• Soft-Start
Function
• Fixed
Frequency
Voltage
Mode
•
500mA Peak Output Drive Capability
•
Protects the output when control FET is shorted
•
Lead Free Package SOP-8L
•
SOP-8L: Available in “Green” Molding Compound
(No Br, Sb)
•
Lead Free Finish/ RoHS Compliant (Note 1)
The AP2014 controller IC is designed to provide a low cost
synchronous Buck regulator for on-board DC to DC converter
applications. With today’s ASIC products requiring supply voltages
at 1.8V and lower, when the output current is as much as 3A and
the input voltage is at either 3.3V or 5V, traditional linear regulator
simply incurs too much loss within itself. The AP2014 together with
dual N-channel MOSFETs provide a low cost solution for such
applications. This device features an internal 200KHz oscillator
(400KHz for "A" version), under-voltage lockout for both Vcc and
Vc supplies, an external programmable soft-start function as well
as output under-voltage detection that latches off the device when
an output short is detected.
Applications
• Graphic
Card
•
Hard Disk Drive
•
DDR memory source sink Vtt application
•
Low cost on-board DC to DC such as 5V to 3.3V, 2.5V or 1.8V
Ordering Information
AP 2014/A S X - 13
Package
Packing
Lead Free
13 : Tape & Reel
S : SOP-8L
L : Lead Free
G : Green
Device
Package
Code
Packaging
(Note 2)
13” Tape and Reel
Quantity
Part Number Suffix
AP2014SL-13
S
SOP-8L
2500/Tape & Reel
-13
AP2014SG-13
S
SOP-8L
2500/Tape & Reel
-13
AP2014ASL-13
S
SOP-8L
2500/Tape & Reel
-13
AP2014ASG-13
S
SOP-8L
2500/Tape & Reel
-13
Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions appli
2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
Features
General Description