Diodes D1213A-04V - Manual (Page 2)

D1213A-04V
Document number: DS35290 Rev. 4 - 2
2 of 5
www.diodes.com
November 2012
© Diodes Incorporated
D1213A-04V
ADVAN
CE I
N
F
O
RM
ATI
O
N
Maximum Ratings
(@T
A
= +25°C, unless otherwise specified.)
Characteristic Symbol Value Unit Conditions
Operating Supply Voltage V
P
- V
N
6.0 V -
DC Voltage at any Channel Input - (V
N
– 0.5) to (V
P
+ 0.5) V -
Peak Pulse Current I
PP
5.0 A 8/20
μs, Per Fig. 3
ESD Protection – Contact Discharge V
ESD_Contact
±8 kV Standard IEC 61000-4-2
ESD Protection – Air Discharge V
ESD_Air
±15 kV Standard IEC 61000-4-2
Thermal Characteristics
Characteristic Symbol Value Unit
Power Dissipation (Note 5) P
D
380 mW
Thermal Resistance, Junction to Ambient (Note 5) R θJA 327 °C/W
Operating and Storage Temperature Range T
J
, T
STG
-55 to +150 °C
Electrical Characteristics
(@T A = +25°C, unless otherwise specified.)
Characteristic Symbol Min Typ Max Unit Test Conditions
Operating Supply Voltage V
P
- 3.3 5.5 V −
Operating Supply Current (Note 6) I
P
- - 8.0
μA
(V
P
– V
N
) = 3.3V
Channel Leakage Current (Note 6) I
R
- 0.1 1.0 μA V
P
= 5V, V
N
= 0V
Reverse breakdown voltage V
BR
6.0 - - V I
R
= 1mA
Clamping Voltage, Positive Transients V
CL1
- 10.0 - V I
PP
= 1A (Note 7)
Clamping Voltage, Negative Transients V
CL2
- -1.7 - V I
PP
= -1A (Note 7)
Forward Voltage for Top Diode V FD1
0.60 0.80 0.95 V I F = 8mA, any channel to V P
Forward Voltage for Bottom Diode V
FD2
0.60 0.80 0.95 V I
F
= 8mA, V
N
to and channel
Dynamic Resistance R
DYN
- 0.9 - Ω I
PP
= 1A (Note 7)
Channel Input Capacitance C T
- 0.85 1.2 pF
V IN = 1.65V, V P = 3.3V,
V
N
= 0V, f = 1MHz
Notes: 5. Device mounted on FR-4 PCB pad layout (2oz copper) as shown on Diodes, Inc. suggested pad layout AP02001, which can be found on our website at
http://www.diodes.com.
6. Short duration pulse test used to minimize self-heating effect.
7. Clamping voltage value is based on an 8x20
μs peak pulse current (I
pp
) waveform.
8. Measured from any channel to V
N
9. Measured from V
P
to V
N
.
10. For information on the impact of Diodes' USB 2.0 compatible ESD protectors on signal integrity including eye diagram plots, please refer to AN77 at the
following URL: http://www.diodes.com/destools/appnote_dnote.html.