Xoro HRT 5000 - Manual (Page 76)

36 HRT 5000
Engl
ish
Media+
Settings
Rename
If you want to rename a recording, then press 3. After an on-screen keyboard appears. With the on-
screen keyboard you can perform the operation. To navigate with the on-screen keyboard use the
arrow keys and the OK button.
Information
Press the button 4 and than the recorded EPG
information appears on the screen, if available.
Disc Information
Here you can gets an overview about the connected
SD card.
DVR Configuration
The option includes the submenu’s of:
•
Prefered Storage
• Time-Shift Time
• Record Type
• Standby Mode
Time-Shift Time
Here the size of the time shifts is defined in minutes.
When switched on have this option, you time-shift is available. The start is then time-shift through the
PAUSE button during the live image.
Record Type
Here you can switch between the transport stream (TS), or select program stream (PS). The essential
difference is that is stored within the transport stream, the EPG information.
Stand-By Mode
This function determines whether the device switches to the programmed recording in standby mode
or not.