Diodes SBR02M30LP - Manual

SBR02M30LP
0.2A SBR
®
SUPER BARRIER RECTIFIER
NEW PRODUCT
SBR is a registered trademark of Diodes Incorporated.
Features
• Ultra Low Leakage Current
• Excellent High Temperature Stability
•
Patented Super Barrier Rectifier Technology
•
Soft, Fast Switching Capability
• 175ºC Operating Junction Temperature
• Lead Free Finish, RoHS Compliant (Note 1)
•
“Green” Molding Compound (No Br, Sb)
•
Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
• Case: DFN1006-2
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020D
•
Polarity Indicator: Cathode Dot
•
Terminals: Finish - NiPdAu over Copper leadframe. Solderable
per MIL-STD-202, Method 208
• Marking Information: See Page 3
•
Ordering Information: See Page 3
•
Weight: 0.001 grams (Approximate)
Top View Bottom View
Maximum Ratings
@T
A
= 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage V RRM
V RWM
V
RM
30 V
RMS Reverse Voltage V
R(RMS)
21 V
Average Rectified Output Current (See Figure 1) I O
0.2 A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
I
FSM
5.0 A
Thermal Characteristics
Characteristic Symbol Value Unit
Maximum Thermal Resistance
Thermal Resistance Junction to Soldering (Note 2)
Thermal Resistance Junction to Ambient (Note 3)
R θJS
R θJA
18
263
ºC/W
Operating and Storage Temperature Range T
J
, T
STG
-65 to +175 ºC
Electrical Characteristics
@T
A
= 25°C unless otherwise specified
Characteristic Symbol Min Typ Max Unit Test Condition
Reverse Breakdown Voltage (Note 4) V
(BR)R
30 - - V I
R
= 400µA
Forward Voltage Drop V
F
-
0.50
0.42
0.57
0.51 0.54
0.45
0.61
0.54
V
I
F
= 0.1A, T
J
= 25ºC
I
F
= 0.1A, T
J
= 150ºC
I
F
= 0.2A, T
J
= 25ºC
I
F
= 0.2A, T
J
= 150ºC
Leakage Current (Note 4) I
R
-
0.1
46
0.5
150
µA
V
R
= 30V, T
J
= 25ºC
V R = 30V, T J = 150ºC
Notes: 1. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7.
2. Theoretical R θJS calculated from the top center of the die straight down to the PCB cathode tab solder junction.
3. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Short duration pulse test used to minimize self-heating effect.
SBR02M30LP
Document number: DS31061 Rev. 5 - 2
1 of 3
www.diodes.com
March 2008
© Diodes Incorporated