Diodes SBR15U30SP5Q - Manual

SBR and POWERDI are registered trademarks of Diodes Incorporated.
SBR15U30SP5Q
Document number: DS36115 Rev. 2 - 2
1 of 6
www.diodes.com
April 2013
© Diodes Incorporated
SBR15U30SP5Q
NEW PROD
UC
T
ADVANCED INFORMATION
15A SBR ®
SUPER BARRIER RECTIFIER
POWERDI ® 5
Product Summary
V
RRM
(V) I
O
(A) V
F(MAX)
(V) I
R(MAX)
(mA)
30 15 0.49 0.3
Description
This Super Barrier Rectifier (SBR) diode has been designed to meet
the stringent requirements of Automotive Applications. It is ideally
suited to use as :
Applications
 Polarity Protection Diode
 Re-circulating Diode
 Switching Diode
Features and Benefits
 Patented SBR technology provides a superior avalanche
capability than schottky diodes ensuring more rugged and
reliable end applications.
 Reduced Ultra-low forward voltage drop (V
F
); better efficiency
and cooler operation.
 Reduced high temperature reverse leakage; Increased reliability
against thermal runaway failure in high temperature operation
 Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
 Halogen and Antimony Free. “Green” Device (Note 3)
 Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
 Case: POWERDI5
 Case Material: Molded Plastic, “Green” Molding compound. UL
Flammability Classification Rating 94V-0
 Moisture Sensitivity: Level 1 per J-STD-020
 Terminals: Finish - Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
 Polarity: See Below
 Weight: 0.093 grams (approximate)
Ordering Information
(Note 4)
Part Number Case Packaging
SBR15U30SP5Q-13 POWERDI5 5000/Tape & Reel
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http”//www.diodes.com/products/packages.html.
Marking Information
Top View Bottom View
LEFT PIN
RIGHT PIN
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
BOTTOMSIDE
HEAT SINK
S15U30S = Product Type Marking Code
= Manufacturers’ Code Marking
K = Factory Designator
YYWW = Date Code Marking
YY = Last Two Digits of Year (ex: 13 for 2013)
WW = Week code (01 - 53)
YYWWK
S15U30S
POWERDI5
Green