Diodes SBR0560S1 User Manual
Features, Mechanical data, Maximum ratings
SBR0560S1
Document number: DS31525 Rev. 2 - 2
1 of 4
www.diodes.com
June 2009
© Diodes Incorporated
SBR0560S1
NEW PROD
UC
T
SBR is a registered trademark of Diodes Incorporated.
0.5A SBR
®
SUPER BARRIER RECTIFIER
Features
•
Low Forward Voltage Drop
•
Low Reverse Leakage
•
Excellent High Temperature Stability
•
Patented Super Barrier Rectifier Technology
•
Soft, fast switching capability
•
150ºC Operating Junction Temperature
•
Lead, Halogen and Antimony Free, RoHS Compliant
•
“Green” Device (Note 1)
Mechanical Data
• Case:
SOD-123
•
Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
•
Moisture Sensitivity: Level 1 per J-STD-020D
•
Leads: Solderable per MIL-STD-202, Method 208
•
Lead Free Plating (Matte Tin Finish annealed over Alloy 42
leadframe)
•
Polarity: Cathode Band
•
Marking Information: See Page 3
•
Ordering Information: See Page 3
•
Weight: 0.004 grams (approximate)
Maximum Ratings
@T
A
= 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V
RRM
V
RWM
V
RM
60 V
Average Rectified Output Current
I
O
500 mA
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-Wave Superimposed on Rated Load
I
FSM
15 A
Thermal Characteristics
Characteristic Symbol
Value
Unit
Typical Thermal Resistance
Thermal Resistance Junction to Ambient Air (Note 2)
Thermal Resistance Junction to Ambient Air (Note 3)
R
θJA
R
θJA
305
271
ºC/W
Operating and Storage Temperature Range
T
J
, T
STG
-65 to +150
ºC
Electrical Characteristics
@T
A
= 25°C unless otherwise specified
Characteristic Symbol
Min
Typ
Max
Unit
Test
Condition
Forward Voltage (Per Diode)
V
F
-
-
0.44
-
0.44
0.50
0.46
V
I
F
= 0.25A, T
J
= 25ºC
I
F
= 0.5A, T
J
= 25ºC
I
F
= 0.5A, T
J
= 125ºC
Leakage Current (Note 4)
I
R
-
-
-
100
25
µA
mA
V
R
= 60V, T
J
= 25ºC
V
R
= 60V, T
J
= 125ºC
Notes:
1. No purposefully added lead. Halogen and Antimony Free.
2. Part mounted on FR-4 board with recommended pad layout, which can be found on our websit
3. Part mounted on Polymide board with recommended pad layout, which can be found on our website at4. Short duration pulse test used to minimize self-heating effect.
Top View