AVSL Citronic CLA-1460 - Manual (Page 2)

171.220 User Manual
Warning
To prevent risk of fire or electric shock, do not expose any of the components to rain or moisture.
If liquids are spilled on the amplifier panel, stop using immediately, allow unit to dry out and have
checked by qualified personnel before further use. Avoid impact or dropping of the cabinets.
No user serviceable parts inside – Do not open the case – refer all servicing to qualified service
personnel.
Safety
 Ensure all fixings are secure and adequate for supporting the weight of the CLA-1460
 Ensure that the power cord is in good condition and adequate for the power rating
 Check for correct mains voltage and condition of IEC lead before connecting to power outlet
 Ensure speaker link leads are good condition with no short connections or damaged plugs
 Connect no more than 4 mid-top array cabinets to one active sub unit
 Avoid constant overload of the unit (indicated by constant lighting of the PEAK LED)
 Do not allow any foreign objects to enter the case or through the speaker grilles
 In case of failure of the CLA-1460, disconnect from the mains and check fuse. If fault repeats,
refer to qualified service personnel
Placement
 Keep amplifier panel out of direct sunlight and away from heat sources
 Avoid damp or dusty environments
 Ensure that the CLA-1460 is not positioned in a manner that may cause injury
 Ensure adequate access to controls and connections
Cleaning
 Use a soft cloth with a neutral detergent to clean the casing as required
 Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
 Do not use strong solvents for cleaning the unit