Armasight TFT268BN0BTSXRP FLIR BTS-XR Pro 640x480 Thermal Bi-ocular, no lens 8.3Hz, NTSC - Manual (Page 17)

Scout Bi-Ocular Operator’s Manual 3—Operating Your Camera
431-BTS0-00-10, Revision 110 11
3–3 Installing the Batteries
The batteries must be installed and charged before using your
camera.
1. Pull off the battery cover by
lifting the latch as shown at the
right.
2. Install the batteries
paying attention to
the positive and
negative markings,
as shown at the
right.
3. Re-install the battery
cover by engaging
the hinge and
snapping the latch
back in place.
If you have installed rechargeable batteries, they must be charged
before using the camera. Regular AA batteries may be used but will
only provide about one and a half hours of camera use.
Battery
cover
latch
431-BTS0-00-10 Scout Bi-Oc Ops Manual.book Page 11 Thursday, March 29, 2012 1:27 PM