Armasight NKGVEGA00111I11 VEGA GEN1+ Night Vision Goggle - Manual (Page 4)

4
STANDARD COMPONENTS AND OPTIONAL EqUIPMENT
1) Armasight Vega Goggles
Night vision goggles with 1x magnification.
2) Objective Lens Cap
The Objective Lens Cap is designed to protect the objective lens from physical damage, as well as allow
the testing of the device’s operation in daylight.
3) Eye Cup
The rubber eye cup is designed to protect the eyepiece and to provide comfort of use for the user.
4) CR123A Lithium Battery
3V CR123A lithium batteries are used to supply power to the unit.
5) Head Mount
Adjustable universal assembly that secures the goggles to the user’s head, providing hands-free opera-
tion.
6) User Manual
The user manual contains a full description of the device and accessories, information about controls,
installation, maintenance and troubleshooting procedures.
7) Carrying Case
The carrying case is used to store and carry the Vega goggles and accessories.
8) Optional IR810 Detachable Long Range IR illuminator (Part# ANKI000016)
Extra long-range infrared illuminator. Provides greater viewing capabilities when the environment has
little or no ambient light. Dovetail to Weaver Transfer Piece #21 is included.
2. PREPARATIONS FOR OPERATION
WARNING :
the vega night vision goggles are designed for several years of reliable service. to ensure
trouble-free performance, please observe the following instructions:
• Do not activate the device in daylight unless the protective lens cover is fitted securely over
the lens. If the device is ON, do not direct the device at bright light sources, such as car head-
lights, camp fires, street lights, etc., as this will cause damage to the device.
• Do not check the device operation in daylight unless the front lens cap is fitted securely over
the lens, and even then, the device should only be ON for the few seconds it takes to establish
correct operation.
• Do not open the body of the device or otherwise disassemble it.
• Avoid dropping or otherwise impacting the device.
• Do not expose the device to moisture or extreme temperatures.
• Do not touch the lenses. Clean optical parts with a clean, soft cloth, and only use professional
lens cleaners designed for use with optics.
• Do not forget to remove the battery from the battery compartment if the device is to be
stored for more than 3 days.
• Do not forget to turn the device OFF during periods of non-operation.