Armasight NKGNINOX0111I11 NINOX GEN 1+ Night Vision Goggles - Manual (Page 4)

4
STANDARD COMPONENTS AND OPTIONAL EqUIPMENT
1) Armasight Ninox Goggles
Night vision goggles with 1x magnification.
2) Objective Lens Caps
The Objective Lens Caps are designed to protect the objective lens from physical damage, as well as
allow the testing of the device’s operation in daylight.
3) Eye Cups
The rubber eye cups are designed to protect the eyepieces and to provide comfort of use for the user.
4) CR123A Lithium Battery
3V CR123A lithium batteries are used to supply power to the unit.
5) Head Mount
Adjustable universal assembly that secures the goggles to the user’s head, providing hands-free opera-
tion.
6) User Manual
The user manual contains a full description of the device and accessories, information about controls,
installation, maintenance and troubleshooting procedures.
7) Carrying Case
The carrying case is used to store and carry the Ninox goggles and accessories.
8) Optional IR810 Detachable Long Range IR illuminator w/Dovetail to Weaver Transfer Piece #21
(Part# ANKI000016)
Extra long-range infrared illuminator. Provides greater viewing capabilities when the environment has
little or no ambient light. Completed with Dovetail to Weaver Transfer Piece that allows the IR illumina-
tor to be mounted on the Ninox.
2. PREPARATIONS FOR OPERATION
WARNING :
the ninox night vision goggles are designed for several years of reliable service. to ensure
trouble-free performance, please observe the following instructions:
• Do not activate the device in daylight unless the protective lens covers is fitted securely over
the lenses. If the device is ON, do not direct the device at bright light sources, such as car head-
lights, camp fires, street lights, etc., as this will cause damage to the device.
• Do not check the device operation in daylight unless the front lens caps are fitted securely
over the lenses, and even then, the device should only be ON for the few seconds it takes to
establish correct operation.
• Do not open the body of the device or otherwise disassemble it.
• Avoid dropping or otherwise impacting the device.
• Do not expose the device to moisture or extreme temperatures.
• Do not touch the lenses. Clean optical parts with a clean, soft cloth, and only use professional
lens cleaners designed for use with optics.
• Do not forget to remove the battery from the battery compartment if the device is to be
stored for more than 3 days.
• Do not forget to turn the device OFF during periods of non-operation.