Xoro HRT 8300 - Manual (Page 59)

HRT 8300 ENG 19
Engl
ish
Recorder
There are two ways of programming a recording with Timer.
1.
Choose the program to be recorded in EPG and press
the GREEN button (see page 18).´Program, date, and
time will be taken over from the EPG.
2. Press the button TIMER. Select an empty Timer
(„Out“) and press the OK button.
After all parameters on the Timer have been set, move the
cursor with ▲/▼ to the field „save“ and confirm with OK.
Example:
Once, Record, RTL HH SH, 03.11.2011, 14:00 to 15:00
Timer Mode:
Once
Timer Service: Record
Wakeup Channel: RTL HH SH
Wakeup Date: 03/11/2011
Wakeup Tim: 14:00
Duration: 01:00
Notes:
To delete a Timer, set the Timer Mode to be „Out“ and move the cursor to the field „Save“ and
confirm with OK. The timer is deleted.
Timer Recording
Settings Explanation
Timer Mode Once: implement the timer once
Daily: implement the timer everyday
Mo-Fr: implement the timer on week days (Mo.-Fr.)
Weekly: implement the timer every week
Timer Service Record: recording program on USB storage
Channel: switch on the receiver at the given time
Wakeup Channel Select the program to be recorded. You can display the channel list with the
OK button.
Wakeup Date Choose the date of Timer Implementation (TT/MM/JJJJ)
Wakeup Time Set the time of start
Duration Set the duration of recording