Xoro HRT 8300 - Manual (Page 57)

HRT 8300 ENG 17
Engl
ish
Select Sound track/Language
If your TV has multiple sound tracks, you can make the selection with the Audio button.
Press the AUDIO button and select with the ▲/▼ buttons.
Teletext
You may use the number buttons 0-9 on the remote control for a direct entry of the wished page.
To quit the teletext page press EXIT.
Videotext
You can display the video text with the TTX button.
0 - 9
entry of the page number
◄/► switch among sub-pages
OK
set the back ground transparent
EXIT quit video text
Mute
Press the MUTE button to switch off the tone. Press the MUTE button once more, the tone will be
turned on again.
Change Volume
To increase or decrease the volume press the ◄/►(VOL+/VOL-
button.
If you output Dolby Digital as Bitstream (RAW) through HDMI or
S/PDIF, the volume is not regulated by the receiver.
Information
You will have the access to various of information by pressing the INFO button once or a multiple of
times.
Resolution
You can change resolution of the output through HDMI or YPbPr with the RES button.. Press the
RES button repeatedly. The receiver needs possibly some time to recognize a new resolution. The
button interaction should have an interval of a couple of seconds.
Notes:
If the video output SCART RGB is activated, there is only one resolution (576i) possible. See page
32
Daily Operation
Important Buttons and their Function