Asus MEZ-M - Manual (Page 29)

ASUS MEZ-M User’s Manual 29
III. HARDWARE SETUP
Connectors
III. H/W SETUP
15. IDE Device Activity LED (2-pin IDELED)
This connector supplies power to the cabinet’s hard disk or IDE activity LED.
Read and write activity by devices connected to the Primary or Secondary IDE
connectors will cause the LED to light up.
MEZ-M IDE Activity LED
TIP: If the case-mounted LED does not
light, try reversing the 2-pin plug.
IDELED
R
MEZ-M
16. SB-Link™ Connector (6-1 pin SBLINK)
If you have a Sound Blaster compatible PCI audio card, you must link it to this
connector. Otherwise, you will have compatibility issues under DOS environment.
MEZ-M SB-Link™ Header
NOTE: Pin 3 is removed to ensure the
correct orientation of the cable on it.
SBLINK
PC/PCI Request
Sideband Signal
5
6
1
DGND
2
DGND
Serial IRQ
PC/PCI Grant
Sideband Signal
R
MEZ-M