Asus P5ND2 SE - Manual (Page 76)

2-30 Chapter 2: BIOS setup
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specific Help
Select which graphics
controller to use as the
primary boot device.
PCIPnP
Primiary Display Adaptor [ PCI ]
Phoenix-Award BIOS CMOS Setup Utility
Advanced
2.4.4 PCIPnP
Primary Display Adaptor [PCI]
Allows you to set which graphics controller to use as primary boot device.
Configuration options: [PCI] [PCI-E]
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specific Help
Press [Enter] to set.
Onboard Device Configuration
IDE Function Setup
NVRAID Configuration
Onboard Rtl Giga LAN [Enabled]
Onboard Rtl Giga LAN Boot ROM [Disabled]
HD Audio [Enabled]
Serial Port1 Address [3F8/IRQ4]
Parallel Port Address [378/IRQ7]
Parallel Port Mode [Bi-Directional]
ECP Mode Use DMA [3]
Game Port Address [201]
Midi Port Address [330]
Midi Port IRQ [10]
Phoenix-Award BIOS CMOS Setup Utility
Advanced
2.4.5 Onboard Devices Configuration