Asus M3A78-CM - Manual (Page 50)

2-12 ASUS M3A78-CM
GPU Overclocking [Auto]
Allows you to select the GPU Overclocking. Configuration options: [Auto] [Manual]
PCIE Overclocking [Auto]
Allows you to select the PCIE Overclocking. Configuration options: [Auto] [Manual]
Processor Frequency Multiplier [Auto]
Allows you to set the processor frequency multiplier.
Processor Voltage [Auto]
Allows you to set the processor voltage. Configuration options: [Auto] [+50mv] [+100mv]
[+150mv]
Processor-NB OverVoltage [Auto]
Allows you to set the processor-NB voltage. Configuration options: [Auto] [+50mv] [+100mv]
[+150mv]
HyperTransport Speed [Auto]
Allows you to set the HyperTransport link speed.
Hyper Transport Width [Auto]
Allows you to set the HyperTransport link width. Configuration options: [Auto] [4 Bit] [8 Bit]
[16 Bit]
Memory Clock Mode [Auto]
Allows you to set the memory clock mode. Configuration options: [Auto] [Manual]
DRAM Timing Mode [Auto]
Allows you to set the DRAM timing mode. Configuration options: [Auto] [DCT 0]
Memory OverVoltage [Auto]
Allows you to set the memory over voltage. The value ranges from 1.85000V to 2.24375V
with a 0.00625V interval. Configuration options: [Auto]
Chipset Over Voltage [Auto]
Allows you to set the chipset over voltage. Configuration options: [Auto] [+50mv] [+100mv]
[+150mv]
2.4.2 CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically
detects.
GART Error Reporting [Disabled]
This option should remain disabled for the normal operation. The driver developer may
enable it for testing purpose. Configuration options: [Disabled] [Enabled]
Microcode Updation [Enabled]
Allows you to enable or disable the microcode updation. Configuration options: [Disabled]
[Enabled]