Asus F2A85-M2 - Manual (Page 62)

2-18 Chapter 2: Getting started
2.5.11 Network Stack
Network Stack [Disable Link]
This item allows user to disable or enable the UEFI network stack. Configuration options:
[Disable Link] [Enabled]
The following two items appear only when you set the previous item to [Enabled].
Ipv4 PXE Support [Enabled]
This item allows user to disable or enable the Ipv4 PXE Boot support. Configuration options:
[Disable Link] [Enabled]
Ipv6 PXE Support [Enabled]
This item allows user to disable or enable the Ipv6 PXE Boot support. Configuration options:
[Disable Link] [Enabled]
Legacy OS Redirection Resolution [80x25]
Sets the number of rows and columns supported in a legacy OS. Configuration options:
[80x25] [80x24]
Putty KeyPad [VT100]
Selects FunctionKey and Keypad on Putty. Configuration options: [VT100] [Linux]
[XTERMR6] [SCO] [ESCN] [VT400]
Redirection After BIOS POST [Always Enable]
This setting specifies if BootLoader is loaded before booting to a Legacy OS.
Configuration options: [Always Enable] [Bootloader]