Asus F2A85-M2 - Manual (Page 57)

ASUS F2A85-M2 2-13
2.5.6 USB Configuration
The items in this menu allow you to change the USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
USB Device Enable
[Enabled] Enables USB devices
[Disabled] Disables USB devices
Legacy USB Support [Enabled]
[Enabled] Enables the support for USB devices on legacy operating systems (OS).
[Disabled] The USB devices can be used only for the BIOS setup program.
[Auto] Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
Legacy USB3.0 Support [Enabled]
This item appears only when you set the previous item to [Auto] or [Enabled].
[Enabled]
Enables the support for USB 3.0 devices on legacy operating systems
(OS).
[Disabled] Disables the function.
EHCI Hand-off [Disabled]
[Enabled] Enables the support for operating systems without an EHCI hand-off
feature.
[Disabled] Disables the function.
USB Single Port Control
Allows you to enable/disable individual USB ports.
USB3_1~4, USB1~8 [Enabled]
[Enabled]
Enables USB3_1~4, USB1~8
[Disabled] Enables USB3_1~4, USB1~8