Asus A7V-E - Manual (Page 70)

ASUS A7V-E User’s Manual 70
4. BIOS SETUP
4. BIOS SETUP
4.5.2 Hardware Monitor
MB Temperature [xxxC/xxxF] / CPU Temperature [xxxC/xxxF]
The onboard hardware monitor is able to detect the MB (motherboard) and
CPU temperatures. Set to [Ignore] only if necessary.
CPU Fan Speed [xxxxRPM] / Chassis Fan Speed [xxxxRPM]
The onboard hardware monitor is able to detect the CPU fan speed and the
chassis fan speed in rotations per minute (RPM). The presence of the fans is
automatically detected. Set to [Ignore] only if necessary.
VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage [xx.xxV]
686A Voltage
The onboard hardware monitor is able to detect the voltage output by the
onboard voltage regulators. Set to [Ignore] only if necessary.
NOTE: If any of the monitored items is out of range, an error message will
appear: “Hardware Monitor found an error. Enter Power setup menu for
details”. You will then be prompted to “Press F1 to continue, DEL to enter
SETUP”.
Power Up Control
Automatic Power Up [Disabled]
This allows an unattended or automatic system power up. You may config-
ure your system to power up at a certain time of the day by selecting [Every-
day] or at a certain time and day by selecting [By Date]. NOTE: Automatic
Power Up will not work if the system is powered down by operating sys-
tems, such as Windows 98, that have ACPI support enabled. Configuration
options: [Disabled] [Everyday] [By Date]