Asus A7V-E - Manual (Page 17)

ASUS A7V-E User’s Manual 17
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
Motherboard Features Settings (DIP Switches - SW1)
The motherboard’s onboard functions are adjusted through the DIP switches. The
white block represents the switch’s position. The example below shows all the
switches in the OFF position.
CLOCK TABLE
A7V-E DIP Switches
5. Frequency Selection
4. Frequency Selection
3. Frequency Selection
2. Frequency Selection
1. Frequency Selection
ON
12
3
4
5
ON OFF
ON
1 2 3 4 5
ON
OFF
1. Frequency Multiple
2. Frequency Multiple
3. Frequency Multiple
4. Frequency Multiple
5. Frequency Multiple
DSFID
01 01
A7V-E
®
1) Jumper Setting (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. In this
version he JumperFree™ mode allows CPU external frequency settings to be
made through the BIOS setup (see 4.4 Advanced Menu). If Jumper Mode is
selected, and the switches are used, then DSFID switch 5 must be set to on for
all Clock Multiplier combinations.
Setting JEN
JumperFree™ [2-3] (default)
Jumper Mode [1-2]
0 1 01
A7V-E
®
Jumper Mode JumperFree Mode
(Default)
A7V-E JumperFree™ Mode Setting
JEN
1 2
JEN
2 3
ON
OFF
DSFID
ON
OFF
DSFID
ON
1 2 3 4 5
CPU
ON
1 2 3 4 5
100MHz
CLOCK TABLE
ON
OFF
ON
1 2 3 4 5