Asus X79-DELUXE - Manual (Page 98)

3-20 Chapter 3: BIOS setup
Chapter 3
VTTCPU Voltage [Auto]
Allows you to configure the voltage amount for the processor’s cores and cache. Use the
<+> or <-> keys to adjust the value. The values range from 1.05000V to 1.70000V with a
0.003125V interval.
PCH 1.1v Voltage [Auto]
Allows you to configure the voltage amount for the PCH chipset. Use the <+> or <-> keys to
adjust the value. The values range from 1.10000V to 1.70000V with a 0.003125V interval.
PCH 1.5v Voltage [Auto]
Allows you to configure the voltage amount for the PCH chipset’s I/O interface. Use the
<+> or <-> keys to adjust the value. The values range from 1.50000V to 1.80000V with a
0.00625V interval.
VTTDDR Voltage (CHA, CHB) [Auto]
Allows you to configure the active termination voltage for the DRAM on channels A and B.
Use the <+> or <-> keys to adjust the value. The values range from 1.62500V to 1.10000V
with a 0.00625V interval.
VTTDDR Voltage (CHC, CHD) [Auto]
Allows you to configure the active termination voltage for the DRAM on channels C and D.
Use the <+> or <-> keys to adjust the value. The values range from 1.62500V to 1.10000V
with a 0.00625V interval.
DRAM CTRL REF Voltage on CHA [Auto]
Fraction of DRAM Voltage for referencing control on DRAM on Channel A. Use the <+> or
<-> keys to adjust the value. The values range from 0.39500V to 0.63000V with a 0.00500V
interval.
DRAM DATA REF Voltage on CHA [Auto]
Fraction of DRAM Voltage for referencing data on DRAM on Channel A. Use the <+> or <->
keys to adjust the value. The values range from 0.39500V to 0.63000V with a 0.00500V
interval.
DRAM CTRL REF Voltage on CHB [Auto]
Fraction of DRAM Voltage for referencing control on DRAM on Channel B. Use the <+> or
<-> keys to adjust the value. The values range from 0.39500V to 0.63000V with a 0.00500V
interval.
DRAM DATA REF Voltage on CHB [Auto]
Fraction of DRAM Voltage for referencing data on DRAM on Channel B. Use the <+> or <->
keys to adjust the value. The values range from 0.39500V to 0.63000V with a 0.00500V
interval.
DRAM CTRL REF Voltage on CHC [Auto]
Fraction of DRAM Voltage for referencing control on DRAM on Channel C. Use the <+> or
<-> keys to adjust the value. The values range from 0.39500V to 0.63000V with a 0.00500V
interval.