Asus ME99-VM - Manual (Page 50)

ASUS ME-99VM User’s Manual 50
4. BIOS SETUP
4. BIOS SETUP
USB IRQ [Auto]
[Auto] reserves an IRQ# for the USB to work. If you are not using any
USB devices, you may set this feature to [NA] to save an extra IRQ# for
expansion cards. Make sure you do not choose an IRQ number used by
another device. Configuration options: [Auto] [NA] [3] [4] [5] [7] [9] [10]
[11] [12] [14] [15]
ONB VGA BIOS First [No]
This field, when set to [Yes], gives priority to the onboard VGA BIOS over
other VGA controllers. Configuration options: [No] [Yes]
IRQ XX Used By ISA: [No/ICU] / IRQ 5 Used By ISA: [Yes]
These fields indicate whether or not the displayed IRQ for each field is
being used by a legacy (non-PnP) ISA card. [No/ICU] indicates either that
the displayed IRQ is not used or an ISA Configuration Utility (ICU) is
being used to determine if an ISA card is using that IRQ. If you install a
legacy ISA card that requires a unique IRQ, and you are not using an ICU,
you must set the field for that IRQ to [Yes]. For example: If you install a
legacy ISA card that requires IRQ 10, then set IRQ10 Used By ISA to
[Yes]. Configuration options are: [No/ICU] [Yes]
PCI/PNP ISA IRQ Resource Exclusion
PCI Configuration