Asus P5N-EM HDMI - Manual (Page 81)

ASUS P5N-EM HDMI 2-33
CPU Target Temperature [60 ºC / 140 ºF]
Allows you to adjust the CPU target temperature. Configuration options: [10
ºC / 50ºF] [15 ºC / 59 ºF] [20 ºC / 68 ºF]...[85 ºC / 185 ºF].
CPU/MB Temperature
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperatures. These items are not user-configurable.
CPU/Chassis Fan Speed [xxxxRPM]
The onboard hardware monitor automatically detects and displays the CPU,
and Chassis fan speeds in rotations per minute (RPM). If any of the fans is not
connected to the motherboard, the field shows 0. These items are not user-
configurable.
Vcore, Vcc 12, Vcc 3.3V, 5V
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators. Configuration options: [xxx] [Ignored]
CPU Fan Speed warning [600 RPM]
Sets the CPU fan speed warning feature. Configuration options: [Disabled]
[600RPM] [1200RPM] [1600RPM]
2.5.4 Hardware Monitor
The items in this sub-menu displays the hardware monitor values automatically
detected by the BIOS. It also allows you to change CPU Q-Fan feature-related
parameters. Select an item then press to display the configuration options.
Select Menu
Item Specific Help
Enable or Disable Q
FAN function
Phoenix-Award BIOS CMOS Setup Utility
Power
Q-Fan Function [Disabled]
Allows you to enable or disable the Q-Fan function.
Configuration options: [Disabled] [Enabled]
The following item becomes user-configurable when the Q-Fan Function item
is set to [Enabled].
Hardware Monitor
Q-Fan Function [ Disabled ]
x CPU Target Temperature [60 ºC/140ºC ]
CPU Temperature 48ºC/93ºF
MB Temperature 37ºC/98ºF
CPU Fan Speed 2909 RPM
Chassis Fan Speed 0 RPM
Vcore [1.36V]
Vcc 12V [12.14V]
Vcc 3.3V [3.18V]
Vcc 5V [5.05V]
CPU Fan Speed Warning [600 RPM]