beautypg.com

Serial ata hard disk drive connection, Right angle side, 26 chapter 2: hardware information – Asus P5E64 WS Professional User Manual

Page 52: P5e64 ws professional sata connectors, P5b sata connectors, Sata2 sata1, Sata3 sata4, Sata6 sata5

background image

2-26

Chapter 2: Hardware information

3. ICH9R Serial ATA connectors [blue] (7-pin SATA1-SATA6)

These connectors are for the Serial ATA signal cables for Serial ATA hard disk

drives and optical disk drives.

When using the connectors in Standard IDE mode, connect the primary

(boot) hard disk drive to the SATA1/2 connector. Refer to the table below

for the recommended SATA hard disk drive connections.
These connectors are set to Standard IDE mode by default. In Standard

IDE mode, you can connect Serial ATA boot/data hard drives to these

connectors. If you intend to create a Serial ATA RAID set using these

connectors, set the Configure SATA as item in the BIOS to [RAID]. See

section 4.3.6 SATA Configuration for details.
Before creating a RAID set, refer to 5.4.3 Intel RAID configurations or

the manual bundled in the motherboard support DVD.

R

P5B

P5B SATA Connectors

G

ND

RS

AT

A_

TX

P1

RS

AT

A_

TX

N1

G

ND

RS

AT

A_

RX

P1

RS

AT

A_

RX

N1

G

ND

G

ND

RS

AT

A_

TX

P2

RS

AT

A_

TX

N2

G

ND

RS

AT

A_

RX

P2

RS

AT

A_

RX

N2

G

ND

G

ND

RS

AT

A_

TX

P3

RS

AT

A_

TX

N3

G

ND

RS

AT

A_

RX

P3

RS

AT

A_

RX

N3

G

ND

G

ND

RS

AT

A_

TX

P4

RS

AT

A_

TX

N4

G

ND

RS

AT

A_

RX

P4

RS

AT

A_

RX

N4

G

ND

SATA1

SATA4

SATA3

SATA2

P5E64 WS PRO

®

P5E64 WS Professional

SATA connectors

SATA2

SATA1

GND

RS

AT

A_TXP2

RS

AT

A_TXN2

GND

RS

AT

A_RXP2

RS

AT

A_RXN2

GND

GND

RS

AT

A_TXP1

RS

AT

A_TXN1

GND

RS

AT

A_RXP1

RS

AT

A_RXN1

GND

SATA3

SATA4

GND

RS

AT

A_TXP3

RS

AT

A_TXN3

GND

RS

AT

A_RXP3

RS

AT

A_RXN3

GND

GND

RS

AT

A_TXP4

RS

AT

A_TXN4

GND

RS

AT

A_RXP4

RS

AT

A_RXN4

GND

SATA6

SATA5

GND

RS

AT

A_TXP6

RS

AT

A_TXN6

GND

RS

AT

A_RXP6

RS

AT

A_RXN6

GND

GND

RS

AT

A_TXP5

RS

AT

A_TXN5

GND

RS

AT

A_RXP5

RS

AT

A_RXN5

GND

Connect the right-angle side

of SATA signal cable to SATA

device. Or you may connect the

right-angle side of SATA cable to

the onboard SATA port to avoid

mechanical conflict with huge

graphics cards.

right angle side

Serial ATA hard disk drive connection

Connector

Color

Setting

Use

SATA 1/2

Blue

Master

Boot disk

SATA 3/4

Blue

Slave

Boot/Data disk

SATA 5/6

Blue

Master

Boot disk