Asus M4A77TD PRO/U3S6 - Manual (Page 53)

ASUS M4A77TD PRO 2-13
ECC Configuration
ECC Mode [Disabled]
Allows you to set the ECC mode. Configuration options: [Disabled] [Basic] [Good]
[Super] [Max] [User]
Primary Display Adapter [GFX-GPP-PCI]
Selects the primary display adapter. Configuration options: [GFX-GPP-PCI] [GPP-GFX-PCI]
[PCI-GFX-GPP]
GFX: primary display adapter on the PCIe x16_1 slot
GPP: primary display adapter on the PCIe x16_2 or PCIe x1 slot
PCI: primary display adapter on the PCI slot
2.4.3 Chipset
NorthBridge Configuration
DRAM Controller Configuration
Bank Interleaving [Auto]
Allows you to enable the bank memory interleaving. Configuration options: [Disabled]
[Auto]
Channel Interleaving [XOR of Address bit]
Allows you to enable the channel memory interleaving.
Configuration options: [Disabled] [Address bits 6] [Address bits 12]
[XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]]
MemClk Tristate C3/ATLVID [Disabled]
Allows you to enable or disable MemClk Tri-Stating during C3 and Alt VID.
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Allows you to enable or disable memory remapping around memory hole.
Configuration options: [Disabled] [Enabled]
DCT Unganged Mode [Auto]
Allows you to select the unganged DRAM mode (64-bit width).
Configuration options: [Auto] [Always]
Power Down Enable [Enabled]
Allows you to enable or disable DDR power down mode.
Configuration options: [Disabled] [Enabled]