Asus P5KPL-AM IN/ROEM/SI - Manual (Page 18)

1.7 Connectors
1.7.1 Rear panel ports
3. Keyboard/mouse power (3-pin PS2_USBPW1-4)
This jumper allows you to enable or disable the keyboard/mouse and USB port 5-6
wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up the
computer by pressing a key on the keyboard (the default is the Space Bar), clicking
the mouse, or using a USB device. This feature requires an ATX power supply that can
supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. The
USBPW56 jumper is for the rear USB ports.
3 4 2
5 7 6
1
10 8 9
1. PS/2 mouse port (green). This port is for a PS/2 mouse.
2. LAN (RJ-45) port. Supported by Realtek 10/100 LAN controller, this port allows 10/100
connection to a Local Area Network (LAN) through a network hub. Refer to the table
below for the LAN port LED indications.
ACT LED Speed LED
Status Description Status Description
OFF No link OFF No link
Blink Data activity OFF 10M
Blink Data activity Green 100M
LAN port LED indications
SPEED
LED
ACT/LINK
LED
LAN port
1-9 ASUS P5KPL-AM IN/ROEM/SI