Asus P2B-N - Manual (Page 19)

ASUS P2B-N User’s Manual 19
3) Audio Setting (AUDIS_EN)
The onboard 32-bit PCI audio may be enabled or disabled using this jumper.
P2B-N Onboard Audio Setting
R
Enable
(Default)
3 2 1
AUDIS_EN
3 2 1
AUDIS_EN
Disable
4) Keyboard Wake Up (KB_WAKE)
This allows you to disable or enable the keyboard power up function. Set this
jumper to Enable if you wish to use your keyboard (by pressing the spacebar) to
power up your computer. This feature requires an ATX power supply that can
supply at least 300mAmp on the +5VSB lead. The default is set to Disable
because not all computers have the appropriate ATX power supply. Your com-
puter will not power on if you set this to Enable and if you do not have the right
ATX power supply.
WARNING! This jumper setting must coincide with the
BIOS setting (see “Power Up By Keyboard” in the Power Management Setup of
the BIOS SOFTWARE) or else conflicts will occur.
P2B-N Keyboard Wake Up
KB_WAKE
Disable
(Default)
3 2 1
Enable
3 2 1
KB_WAKE R
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
KB WAKE Setting
Disable [1-2] (default)
Enable [2-3]
AUDIS EN Setting
Enable [2-3] (default)
Disable [1-2]