Asus P5E3 WS Professional - Manual (Page 90)

4-22 Chapter 4: BIOS setup
CPU PLL Voltage [Auto]
Allows you to set the CPU PLL voltage. The values range from 1.50V to 2.78V with
a 0.02V interval.
FSB Termination Voltage [Auto]
Allows you to set the front side bus termination voltage. The values range from
1.20V to 1.50V with a 0.02V interval.
DRAM Voltage [Auto]
Allows you to set the DRAM voltage. The values range from 1.50V to 2.78V with a
0.02V interval.
North Bridge Voltage [Auto]
Allows you to set the North Bridge voltage. The values range from 1.25V to 1.75V
with a 0.02V interval.
• Setting the CPU PLL Voltage, FSB Termination Voltage, DRAM Voltage
and North Bridge Voltage to a high level may damage the chipset,
memory module, and CPU permanently. Proceed with caution.
• Some values of the CPU PLL Voltage, FSB Termination Voltage,
DRAM Voltage and North Bridge Voltage items are labeled in different
color, indicating the risk levels of high voltage settings. Refer to the
table below for details.
• The system may need better cooling system to work stably under high
voltage settings.
Blue Yellow Purple Red
CPU PLL Voltage 1.50V~1.78V 1.80V~2.00V 2.02V~2.20V 2.22V+
FSB Termination Voltage 1.20V~1.38V 1.40V~1.50V N/A N/A
DRAM Voltage 1.50V~1.68V 1.70V~1.90V 1.92V~2.10V 2.12V+
North Bridge Voltage 1.25V~1.41V 1.43V~1.55V 1.57V~1.73V 1.75V+
South Bridge Voltage [Auto]
Allows you to set the South Bridge voltage. The values range from 1.05V to 1.20V
with a 0.15V interval.
Clock Over-Charging Voltage [Auto]
Allows you to set the Clock Over-Charging voltage. The values range from 0.70V
to 1.00V with a 0.10V interval.