Asus Vintage-PH1 User Manual

Page 83

A S U S V i n t a g e - P H 1

5 - 1 9

Legacy USB Support [Auto]

Allows you to enable or disable support for USB devices on legacy
operating systems (OS). Setting to Auto allows the system to detect the
presence of USB devices at startup. If detected, the USB controller legacy
mode is enabled. If no USB device is detected, the legacy USB support is
disabled. Configuration options: [Disabled] [Enabled] [Auto]

USB 2.0 Controller [Enabled]

Allows you to enable or disable the USB 2.0 controller.
Configuration options: [Disabled] [Enabled]

USB 2.0 Controller Mode [HiSpeed]

Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or
Full Speed (12 Mbps). Configuration options: [HiSpeed] [Full Speed]

5.4.2

CPU Configuration

The items in this menu show the CPU-related information that the BIOS
automatically detects.

Configure Advanced CPU settings

Manufacturer: Intel
Brand String: Genuine Intel(R) CPU 3.20GHz
Frequency : 3200 MHz
FSB Speed : 800 MHz

Cache L1 : 16 KB
Cache L2 : 1024 KB
Cache L3 : 0 KB

Ratio Status: Unlocked
Ratio Actual Value : 16
Ratio CMOS Setting:

[ 8]

VID CMOS Setting:

[ 62]

Microcode Updation:

[Enabled]

Max CPUID Value Limit:

[Disabled]

Enhanced C1 Control

[Auto]

CPU Internal Thermal Control

[Auto]

Hyper Threading Technology

[Enabled]

Sets the ratio between
CPU Core Clock and the
FSB Frequency.
NOTE: If an invalid
ratio is set in CMOS
then actual and
setpoint values may
differ.

Ratio CMOS Setting [ 8]

Sets the ratio between the CPU Core Clock and the Front Side Bus
frequency. The default value of this item is auto-detected by BIOS. Use the
< + >

< + >

< + > or < - >

< - >

< - > keys to adjust the values.

VID CMOS Setting [ 62]

Allows you to set the VID CMOS setting at which the processor is to run.
The default value of this item is auto-detected by BIOS. Use the < + >

< + >

< + > or

< - >

< - > keys to adjust the values.