Asus Vintage-PH1 User Manual

Page 64

4 - 1 4

C h a p t e r 4 : M o t h e r b o a r d i n f o

•

H a r d d i s k d r i v e a c t i v i t y L E D ( R e d 2 - p i n I D E L E D )

H a r d d i s k d r i v e a c t i v i t y L E D ( R e d 2 - p i n I D E L E D )
This 2-pin connector is for the HDD Activity LED. Connect the HDD
Activity LED cable to this connector. The IDE LED lights up or flashes
when data is read from or written to the HDD.

•

A T X p o w e r b u t t o n / s o f t - o f f b u t t o n ( Y e l l o w 2 - p i n P W R S W )

A T X p o w e r b u t t o n / s o f t - o f f b u t t o n ( Y e l l o w 2 - p i n P W R S W )
This connector is for the system power button. Pressing the power
button turns the system on or puts the system in sleep or soft-off
mode depending on the BIOS settings. Pressing the power switch for
more than four seconds while the system is ON turns the system OFF.

•

R e s e t b u t t o n ( B l u e 2 - p i n R E S E T )

R e s e t b u t t o n ( B l u e 2 - p i n R E S E T )
This 2-pin connector is for the chassis-mounted reset button for
system reboot without turning off the system power.

1 4 .

1 4 . System panel connector (10-1 pin F_PANEL1)

S y s t e m p a n e l c o n n e c t o r ( 1 0 - 1 p i n F _ P A N E L 1 )

This connector supports several chassis-mounted functions.

The sytem panel connector is color-coded for easy connection. Refer to
the connector description below for details.

F_PANEL1

System panel connector

Requires an ATX power supply.

PWR

Ground

GND

Reset

IDE_LED+

IDE_LED-

RESET

IDE LED

PWRSW

PLED

PLED+

PLED-