North bridge configuration – Asus P5K-V User Manual
Page 91

ASUS P5K-V
4-23
North Bridge Configuration
Memory Remap Feature [Enabled]
Allows you to enabled or disable the remapping of the overlapped PCI
memory above the total physical memory. Enable this option only when you
install 64-bit operating system. Configuration options: [Disabled] [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot
device. Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD]
[PEG/PCI]
Internal Graphics Mode Select [Enabled, 8MB]
Allows you to decide whether to use the internal graphics device and select
the amount of memory used by the device.
Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB]
Set this item to [Disabled] if you intend to install a PCIE x16 graphics card to the
primary (blue) PCIE x16 slot.
PEG Port Control [Auto]
Configuration options: [Auto] [Disabled]
PEG Force x1 [Disabled]
This item appears when the PEG Port Control item is set to [Auto].
Configuration options: [Enabled] [Disabled]
The following item appears when the Internal Graphics Mode Select item is
set to [Enabled, 1MB] or [Enabled, 8MB].
Select Screen
Select Item
+-
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory.
North Bridge Chipset Configuration
Memory Remap Feature
[Enabled]
Initiate Graphic Adapter
[PEG/PCI]
Internal Graphics Mode Select [Enabled, 8MB]
PEG Port Control
[Auto]
PEG Port Force x1
[Disabled]
Video Function Configuration
ASUS C.G.I. Function
[Auto]