Asus P5K-V - Manual (Page 56)

2-32 Chapter 2: Hardware information
6. USB connectors (10-1 pin USB78, USB 910, USB1112)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specification that supports up to 480 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
P5K-V
®
P5K-V USB 2.0 connectors
USB910 USB78
USB+5V USB_P8- USB_P8+ GND NC
USB+5V USB_P7- USB_P7+
GND
USB+5V USB_P10- USB_P10+ GND NC
USB+5V USB_P9- USB_P9+
GND
USB1112
USB+5V USB_P12- USB_P12+ GND NC
USB+5V
USB_P1
1-
USB_P1
1+
GND
7. IEEE 1394a port connector (10-1 pin IE1394_2)
This connector is for a IEEE 1394a port. Connect the IEEE 1394a module
cable to this connector, then install the module to a slot opening at the back
of the system chassis.
P5K-V
®
P5K-V IEEE 1394a connector
IE1394_2
PIN 1
GND +12V
TPB1-
GND
TP
A1-
+12V TPB1+ GND TP
A1+
You can connect the front panel USB cable to the ASUS Q-Connector (USB,
blue) first, and then install the Q-Connector (USB) to the USB connector
onboard if your chassis supports front panel USB ports.
The USB module cable is purchased separately.