Asus P5N32-SLI Premium - Manual (Page 100)

- Chapter : BIOS setup
4.5.3 APM Configuration
Restore on AC Power Loss [Disabled]
Allows you to enable or disable the Restore on AC Power Loss function.
Configuration options: [Disabled] [Enabled]
PWR Button < 4 secs [Instant-Off]
Allows you to set the event after the power button is pressed for more than 4
seconds. Configuration options: [Suspend] [Instant-Off]
Power Up On PCI/PCIE Devices [Disabled]
Allows you to enable or disable the PME to wake up from S5 by PCI/PCIE devices
and onboard LAN. Configuration options: [Disabled] [Enabled]
Power On By External Modems [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer
when the external modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the first
try. Turning an external modem off and then back on while the computer is
off causes an initialization string that turns the system power on.
Select Menu
Item Specific Help
Press [Enter] to
select whether or not
to restart the system
after AC power loss.
APM Configuration
Restore on AC Power Loss [Disabled]
PWR Button < 4 secs [Instant-Off]
Power Up On PCI/PCIE Devices [Disabled]
Power On By External Modems [Disabled]
USB Resume from S5 [Disabled] [Disabled]
Power On by RTC Alarm [Disabled]
x Date (of Month) Alarm 0
x Time (hh:mm:ss) Alarm 0 : 0 : 0
Power Up By PS/2 Mouse [Disabled]
Power Up By PS/2 Keyboard [Disabled]
Phoenix-Award BIOS CMOS Setup Utility
Power
F1:Help ↑↓ : Select Item -/�: Change Value F5: Setup Defaults
ESC: Exit →← : Select Menu Enter: Select SubMenu F10: Save and Exit
USB Resume from S5 [Disabled]
When set to [Enabled], this item allows you to use a USB keyboard or USB mouse [Enabled], this item allows you to use a USB keyboard or USB mouse allows you to use a USB keyboard or USB mouse
to resume the system from S5 state. Configuration options: [Disabled] [Enabled] Configuration options: [Disabled] [Enabled]