3 fast boot [enabled, 4 post delay time [3 sec, 5 wait for ‘f1’ if error [enabled – Asus F2A55-M LK PLUS User Manual
Page 68: Fast boot [enabled] -26, Post delay time [3 sec] -26, Wait for ‘f1’ if error [enabled] -26
2-26
ASUS F2A55-M LK Series
Post Report [5 sec]
This item appears only when the Full Screen Logo item is set to [Disabled] and allows you to
set the waiting time for the system to display the post report. Configuration options: [1 sec] [2
sec] [3 sec] [4 sec] [5 sec] [6 sec] [7 sec] [8 sec] [9 sec] [10 sec] [Until Press ESC]
2.7.3
Fast Boot [Enabled]
Enable or disable boot with initialization of a minimal set of devices to launch active boot
option. Configuration options: [Disabled] [Enabled]
The following three items appear only when you set Fast Boot to [Enabled].
USB Support [Partial Initial]
[Disabled]
All USB devices will not be available until OS boot up for a fastest POST
time.
[Full Initial]
All USB devices will be available during POST. This process will extend the
POST time.
[Partial Initial]
For a faster POST time, only the USB ports with keyboard and mouse
connections will be detected.
PS/2 Keyboard and Mouse Support [Auto]
[Auto]
For a faster BIOS POST time, PS/2 devices will only be available when
the system boots up. PS/2 devices will not be available and BIOS Setup
program will not be accessible via PS/2 devices when the system is
restarted.
[Full Initial]
For full system control, PS/2 devices will be available during POST at any
circumstances. This process will extend the POST time.
[Disabled]
All PS/2 devices will not be available until OS bootup for a fastest POST
time.
Network Stack Driver Support [Disabled]
[Disabled]
The BIOS skips over the Network Stack Driver and tries to boot from the
next device.
[Enabled]
Allows the BIOS to boot from the Network Stack Driver.
2.7.4
Post Delay Time [3 sec]
Allows you to set the POST Report wait time. This configuration only functions in Normal
Boot mode. Configuration options: [0 sec] [1 sec] [2 sec] [3 sec] [4 sec] [5 sec] [6 sec] [7 sec]
[8 sec] [9 sec] [10 sec]
2.7.5
Wait for ‘F1’ If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]