Asus I220GC - Manual (Page 62)

2-24 Chapter 2: BIOS setup
Hyper Path 3 [Auto]
Sets this item to enabled to reduce bottlenecks of memory bandwidth. Sets it to
disabled for safe mode. Configuration options: [Disabled] [Enabled] [Auto]
DRAM Throttling Threshold [Auto]
Allows you to enable DRAM Thermal Throttling to make your system more stable.
Configuration options: [Disabled] [Auto]
Boot Graphic Adapter Priority [PCI/Int-VGA]
Allows selection of the graphics controller to use as primary boot device.
Configuration options: [Internal VGA] [PCI/Int-VGA]
Internal Graphics Mode Select [Enabled, 8MB]
Sets the internal graphics mode.
Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB]
DVMT Mode Select [DVMT Mode]
Allows you to select the graphics memory type.
Configuration options: [Fixed Mode] [DVMT Mode] [Combo Mode]
DVMT/FIXED Memory [128MB]
Configuration options: [64MB] [128MB] [Maximum DVMT]
Boot Display Device [Auto]
Configuration options: [Auto] [CRT on Port 0] [LFP on Port 2] [LFP on Port 3] [DFP
on Port 2] [DFP on Port 3] [TV on Port 2] [TV on Port 3] [CRT-Port 0 & CRT-Port 2]
[CRT-Port 0 & CRT-Port 3] [CRT-Port 0 & LFP-Port 2] [CRT-Port 0 & LFP-Port 3]
[CRT-Port 0 & DFP-Port 2] [CRT-Port 0 & DFP-Port 3] [DFP-Port 2 & DFP-Port 3]
High Priority Port Select [Disabled]
Selects the high priority port. Configuration options: [Disabled] [PCI Express Port 2]