Asus P/I-P65UP5/C-PKND - Manual (Page 17)

ASUS P/I-P65UP5 User’s Manual 17
III. INSTALLATION
DRAM Memory Installation Procedures
IMPORTANT: Install memory modules in symmetric pairs.
1. The SIMM memory modules will only fit in one orientation as shown because
of a “Plastic Safety Tab” on one end of the SIMM slots which requires the
“Notched End” of the SIMM memory modules.
72-Pin SIMM Sockets
B=Bank B0 B1 B2 B3 B0 B1 B2 B3
Notched End
2 4 6 8 1 3 5 7
R
2. Press the memory module firmly into place starting from a 45 degree angle
making sure that all the contacts are aligned with the slot.
3. With your finger tips, rock the memory module into a vertical position so that
it clicks into place.
72 Pin DRAM in SIMM Socket Support Clip
Safety Tab (This Side Only) Mounting Hole
4. The plastic guides should go through the two mounting holes on the sides and
the clips should snap on the other side.
5. To release the memory module, squeeze both clips outward and rock the mod-
ule out of the clips.
(DRAM Memory)
III. INST
ALLA
TION