Asus P/I-P65UP5/C-PKND - Manual (Page 13)

ASUS P/I-P65UP5 User’s Manual 13
III. INSTALLATION
Jumper Settings
1. On-Board Multi-I/O Selection (JP1)
You can disable the onboard Multi-I/O (floppy, serial, parallel, and IrDA) indi-
vidually through BIOS or entirely with the following jumper to use your own
multi-I/O card.
Multi-I/O JP1
Enable [1-2] (Default)
Disable [2-3]
1
Multi I/O Setting
2
3
Enable (Default) Disable
JP1 JP1
1
2
3
R
2. Flash ROM Boot Block Programming (JP4)
This sets the operation mode of the boot block area of the BIOS Flash ROM to
allow programming in the Prog (Program or enabled) position.
Programming JP4
Protect (Disabled) [1-2] (Default)
Prog (Enabled) [2-3]
Boot Block Programming
Protect (Default)
1
2
3
JP4
Prog
JP4
1
2
3
R
III. INST
ALLA
TION
(Jumpers)