1 creating a raid 0 set (striped) – Asus P5MT-C User Manual

Page 98

5-4

Chapter 5: Driver installation

5.2.1 Creating a RAID 0 set (striped)

To create a RAID 0 set:

1. From the utility main menu, select 1. Create RAID Volume, then press

. This screen appears.

2. Enter a name for the RAID 0 set, then press .
3. When the RAID Level item is highlighted, press the up/down arrow key

to select RAID 0(Stripe), then press .

4. When the Disks item is highlighted, press to select the hard

disk drives to conﬁgure as RAID. This SELECT DISKS screen appears.

Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5

[

CREATE ARRAY MENU

]

[

DISK/VOLUME INFORMATION

]

Enter a string between 1 and 16 characters in length that can be used

to uniquely identify the RAID volume. This name is case sensitive and

cannot contain special characters.

[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [Enter]-Select

Name:

RAID Level:

Disks:

Strip Size:

Capacity:

Volume0

RAID0(Stripe)
Select Disks
128KB
0.0 GB

Create Volume

[

SELECT DISKS

]

[↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete

Port Drive Model Serial # Size Status

0 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk

1 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk
2 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk
3 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk

Select 2 to 4 disks to use in creating the volume.

5. Use the up/down arrow key to highlight a drive, then press

to select. A small triangle marks the selected drive. Press

after completing your selection.