Asus P5MT-C - Manual (Page 124)

5-30 Chapter 5: Driver installation
3. After selecting the drive to rebuild, press . The indicator for the
selected drive now shows RBLD.
4. When prompted, press to to rebuild the drive.
5. When rebuild is complete, press any key to continue.
Using the Objects command
To rebuild a failed hard disk drive using the Objects command:
1. From the Management Menu, select Objects, then select Physical Drive
from the menu.
2. Use the arrow keys to select the physical drive you want to rebuild,
then press .
3. Select Rebuild from the pop-up menu, then press .
4. When prompted, press to to rebuild the drive.
5. When rebuild is complete, press any key to continue.